Welcome to our fashion store!
Contact Us Catalogs Register
Search Products
Find the product you want
Categories
Products
More results
Menu
Filters
Search Products
Close
Menu

HOKE

Since 1855 Crane has been the world’s leading innovator and pioneer of practical flow control solutions addressing and exceeding our customers’ needs to enable them to operate better, faster and safer. Crane I&S, HOKE offers a comprehensive portfolio of instrumentation and sampling products and solutions.

  • Gyrolok Tube Fittings
  • Instrumentation Valves
  • Actuators
  • Flow and Fluid control components
  • Instrumentation Manifolds
  • HCQ Series Quick Couplings
  • Sampling Cylinders
  • Tools

HOKE® Precision Instrument Pipe Fittings are manufactured with reduced tolerance NPT tapered threads in a wide variety of configurations to provide broad application capabilities.

Ratings and specifications are as follows:

Threads utilised on HOKE® Precision Instrument Pipe Fittings are National Pipe Taper (NPT) which exceed the requirements of ANSI B1.20.1.

Pressure Ratings for temperatures up to 38°C (100°F) are identified for each individual pipe fitting in the dimensional data charts.

Temperatures noted below apply to basic fitting capabilities. In all cases consideration must also be given to the type of thread sealant used. For example, PTFE tape has a maximum temperature rating of 232°C (450°F).

316 Stainless Steel:  -198 to 648°C (-325 to 1200°F) Note: Prolonged exposure to temperature over 426°C (800°F) is not recommended.
Brass:  -198 to 204°C (-325 to 400°F)

Materials: HOKE® Precision Instrument Pipe Fittings are available as standard in Brass and 316 Stainless Steel. HOKE® Pipe Fittings can also be supplied in other materials including Monel®, Hastelloy® C276, Inconel®, Incoloy®, Duplex, Super Duplex and Titanium, as well and in special shapes. Specifications for standard materials are:

316 Stainless Steel Forgings: ASTM A-182
316 Stainless Steel Bar Stock: ASTM A-479
Brass Forgings, Alloy 377: QQ-B-626
Brass Bar Stock, Alloy 353: ASTM B-453
or Alloy 360: QQ-B-626

Heat Traceability: HOKE® Precision Instrument Pipe Fittings are heat code traceable in all alloys except brass with certified material test reports (CMTR’s) available on request.

Monel, Hastelloy, Inconel and Incoloy are registered trademarks.

  

PDF PRODUCT LITERATURE

 

HOKE NPT Full Bore Ball Valves   HOKE Precision Pipe Fittings
HOKE 7G Ball Valves   HOKE Ball Valves
HOKE Fluid Control Components   HOKE Industrial Ball Valves
HOKE Metering Valves   HOKE Needle Valves 
HOKE Prochem Valves Overview   HOKE ABV Ball Valves
 
Sort by
Display per page
Product  
Picture of 15NPT FEMALE 6000PSI POPPET CHECK VALVE 10PSI CRACKING VITON SEAT 316 HOKE
CVHF8Y41S

15NPT FEMALE 6000PSI POPPET CHECK VALVE 10PSI CRACKING VITON SEAT 316 HOKE

Female NPT fractional poppet check valve
 Technical Information
Picture of 8NPT FEMALE 5000PSI MICRON FILTER REMOVABLE 316 40-55 MICRON ELEMENT
6325F4Y

8NPT FEMALE 5000PSI MICRON FILTER REMOVABLE 316 40-55 MICRON ELEMENT

• Trap foreign particles • Protect sensitive equipment • System purging • Pressure damper
Picture of 9.5OD TUBE 500PSI BALL VALVE 3-WAY 316 SELECTOMITE
7165G6Y

9.5OD TUBE 500PSI BALL VALVE 3-WAY 316 SELECTOMITE

Selectomite 3-way ball valves use 180° operation for diverting flow from one line to another. The handle points to the side port in use; when perpendicular to the side ports, it indicates the shutoff position.
Technical Information
Picture of 25NPT FEMALE 2000WOG 3-PIECE BALL VALVE HOKE CF8M MOUNT PAD
7520F16Y

25NPT FEMALE 2000WOG 3-PIECE BALL VALVE HOKE CF8M MOUNT PAD

3-Piece Full Port Ball Valves, Threaded 25NPT (1") Ends, 2000PSI (138 Bar) W.O.G, Enclosed Bolt Type, ISO 5211 Direct Actuator Mounting Pad
Picture of 12.7OD TUBE 6000PSI NEEDLE VALVE SEVERE SERVICE 316
2219G8Y

12.7OD TUBE 6000PSI NEEDLE VALVE SEVERE SERVICE 316

2219 Series - Severe Service Needle Valve
The new Hoke 2219 Needle Valve is an excellent choice for many steam and severe service applications. Grafoil packing below the stem threads provides exceptional service at temperatures up to +1000° F (+538° C). The nonrotating 316 stainless steel stem tip prevents galling.
Technical Information
Picture of 15NPT FEMALE 6000PSI BALL VALVE BAR STOCK 316 ROTO BALL LOW PROFILE HOKE
7C23F8Y

15NPT FEMALE 6000PSI BALL VALVE BAR STOCK 316 ROTO BALL LOW PROFILE HOKE

7C ball valve is designed for a range of media up to 6,000 psi. Its internally loaded blow-out proof stem and floating ball for positive shut-off along with its other features offer a robust, compact and easy to operate valve solution. The 7C is available in 1/4" thru 1" NPT connections.
Technical Information
Picture of 20NPT FEMALE 6000PSI BALL VALVE BAR STOCK 316 ROTOBALL LOW PROFILE
7C23F12Y

20NPT FEMALE 6000PSI BALL VALVE BAR STOCK 316 ROTOBALL LOW PROFILE

7C ball valve is designed for a range of media up to 6,000 psi. Its internally loaded blow-out proof stem and floating ball for positive shut-off along with its other features offer a robust, compact and easy to operate valve solution. The 7C is available in 1/4" thru 1" NPT connections.
7G2210G4Y Ball Valve
7G2210G4Y

6.3 OD TUBE 3000PSI BALL VALVE TFE SEATS HOKE

2-way Ball Valves Multi-directional Flow - 7G Series
 Technical Information
Picture of 12.7 OD TUBE 3000PSI BALL VALVE TFE SEATS HOKE
7G2210G8Y

12.7 OD TUBE 3000PSI BALL VALVE TFE SEATS HOKE

2-way Ball Valve Multi-directional Flow - 7G Series
 Technical Information
Picture of 9.5 OD TUBE 3000PSI BALL VALVE TFE SEATS HOKE
7G2210G6Y

9.5 OD TUBE 3000PSI BALL VALVE TFE SEATS HOKE

2-way Ball Valve Multi-directional Flow - 7G Series
 Technical Information
Picture of 8NPT FEMALE 6000PSI BALL VALVE BAR STOCK 316 ROTOBALL LOW PROFILE
7C23F4Y

8NPT FEMALE 6000PSI BALL VALVE BAR STOCK 316 ROTOBALL LOW PROFILE

7C ball valve is designed for a range of media up to 6,000 psi. Its internally loaded blow-out proof stem and floating ball for positive shut-off along with its other features offer a robust, compact and easy to operate valve solution. The 7C is available in 1/4" thru 1" NPT connections.
Technical Information
Picture of 15NPT FEMALE 6000PSI BALL VALVE FORGED BODY 316 FLOMITE
7115F8Y

15NPT FEMALE 6000PSI BALL VALVE FORGED BODY 316 FLOMITE

2-way Integral Panel Mount Ball Valves
Used for quick on-off service with a visual indication of flow, HOKE’s 2-way ball valves offer orifice sizes up to 0.25” (6.4mm). Flomite valves feature a floating ball design, encapsulated replaceable seats and check seals to ensure leak-tight service and extended service life.
Picture of 8NPT FEMALE 6000PSI BALL VALVE FORGED BODY 316 FLOMITE DELTA PACKING UNI-DIR
7115F4YDL

8NPT FEMALE 6000PSI BALL VALVE FORGED BODY 316 FLOMITE DELTA PACKING UNI-DIR

Uni-directional, High Cycle, Zero Leak 2-way Ball Valves - DL Series
Hoke D series valves exceed 50,000 cycles.
Technical Information
Picture of 6.3OD TUBE 500PSI BALL VALVE 3-WAY 316 SELECTOMITE
7165G4Y

6.3OD TUBE 500PSI BALL VALVE 3-WAY 316 SELECTOMITE

Selectomite 3-way ball valves use 180° operation for diverting flow from one line to another. The handle points to the side port in use; when perpendicular to the side ports, it indicates the shutoff position.
Technical Information
Picture of 8NPT FEMALE 500PSI BALL VALVE 3-WAY BRASS SELECTOMITE
7165F4B

8NPT FEMALE 500PSI BALL VALVE 3-WAY BRASS SELECTOMITE

3-Way Ball Valves
Selectomite 3-way ball valves use 180° operation for diverting flow from one line to another. The handle points to the side port in use; when perpendicular to the side ports, it indicates the shutoff position.
Technical Information
Picture of 8NPT FEMALE 500PSI BALL VALVE 3-WAY 316 SELECTOMITE
7165F4Y

8NPT FEMALE 500PSI BALL VALVE 3-WAY 316 SELECTOMITE

3-Way Ball Valves
Selectomite 3-way ball valves use 180° operation for diverting flow from one line to another. The handle points to the side port in use; when perpendicular to the side ports, it indicates the shutoff position.
Technical Information
Picture of 9.5OD TUBE 6000PSI BALL VALVE FORGED BODY 316 ULTRAMITE
7015G6Y

9.5OD TUBE 6000PSI BALL VALVE FORGED BODY 316 ULTRAMITE

2-Way Ball Valves
Ultramite™ 70 Series valves are designed to guard against accidental disassembly. The tamper-proof fixed end fittings are welded in place, with the exception of the 7065 Series which are pinned.
Technical Information
Picture of 6.3OD TUBE 6000PSI BALL VALVE FORGED BODY 316 ULTRAMITE HOKE
7015G4Y

6.3OD TUBE 6000PSI BALL VALVE FORGED BODY 316 ULTRAMITE HOKE

2-Way Ball Valves
Ultramite™ 70 Series valves are designed to guard against accidental disassembly. The tamper-proof fixed end fittings are welded in place, with the exception of the 7065 Series which are pinned.
Technical Information
Picture of 12.7OD TUBE 6000PSI BALL VALVE FORGED BODY 316 FLOMITE DELTA PACK UNI-DIR
7115G8YDL

12.7OD TUBE 6000PSI BALL VALVE FORGED BODY 316 FLOMITE DELTA PACK UNI-DIR

Uni-directional, High Cycle, Zero Leak 2-way Ball Valves - DL Series
Hoke D and T series valves exceed 50,000 cycles.
Technical Information
Picture of 8NPT MALE/FEMALE 6000PSI BALL VALVE FORGED BODY 316 FLOMITE DELTA PACKING
7115L4YDL

8NPT MALE/FEMALE 6000PSI BALL VALVE FORGED BODY 316 FLOMITE DELTA PACKING

2-way Ball Valves
Hoke D series valves exceed 50,000 cycles.
Picture of 6.3OD TUBE 6000PSI BALL VALVE FORGED BODY 316 FLOMITE DELTA PACKING UNI-DIR
7115G4YDL

6.3OD TUBE 6000PSI BALL VALVE FORGED BODY 316 FLOMITE DELTA PACKING UNI-DIR

Uni-directional, High Cycle, Zero Leak, 2-way Ball Valves - DL Series
Hoke D series valves exceed 50,000 cycles.
Technical Information
Picture of 9.5OD TUBE 6000PSI BALL VALVE FORGED BODY 316 FLOMITE DELTA PACKING UNI-DIR
7115G6YDL

9.5OD TUBE 6000PSI BALL VALVE FORGED BODY 316 FLOMITE DELTA PACKING UNI-DIR

Uni-directional, High Cycle, Zero Leak, 2-way Ball Valves - DL Series
Hoke D series valves exceed 50,000 cycles.
Technical Information
Picture of 6.3OD TUBE 6000PSI BALL VALVE FORGED BODY 316 FLOMITE
7115G4Y

6.3OD TUBE 6000PSI BALL VALVE FORGED BODY 316 FLOMITE

2-way Integral Panel Mount Ball Valves
Used for quick on-off service with a visual indication of flow, HOKE’s 2-way ball valves offer orifice sizes up to 0.25” (6.4mm). Flomite valves feature a floating ball design, encapsulated replaceable seats and check seals to ensure leak-tight service and extended service life.
Technical Information
Picture of 12.7OD TUBE 6000PSI BALL VALVE FORGED BODY 316 FLOMITE
7115G8Y

12.7OD TUBE 6000PSI BALL VALVE FORGED BODY 316 FLOMITE

2-way Integral Panel Mount Ball Valves
Used for quick on-off service with a visual indication of flow, HOKE’s 2-way ball valves offer orifice sizes up to 0.25” (6.4mm). Flomite valves feature a floating ball design, encapsulated replaceable seats and check seals to ensure leak-tight service and extended service life.
Technical Information
Close
Filter by Clear All
Material / Grade Clear
Fitting Type Clear
Material Clear
Connection Size Clear
Valve Type Clear
Connection Type Clear
Working Pressure Clear
Cracking Pressure Clear
Valve Body Clear
Valve Bore Clear
Connection Type 1 Clear
End Connection Size 1 Clear
End Connection Type 1 Clear
  • GYROLOK
  • NPT FEMALE
  • NPT MALE
  • TUBE
  • TUBE
Connection Type 2 Clear
Connection Size 2 Clear
Categories
Brands
Popular tags
View all

Contact Us

Prochem

Customer Help

Social

ASSDA
ASSDA APCO
Copyright © 2024 Prochem. All rights reserved.

Newsletter Subscription

Close