A single isolate/vent block for applications with pressure transmitters of the differential body design.

The MC/MT series includes 2 valve manifolds for static pressure; 3 and 5 valve models for differential pressure transmitters with specific variants for gas and power services, including those that meet ASME B31.3 and B31.1 Power Products for fossil fuel power plants.

The A26 is a five-valve manifold that enables instrument operation, isolation, zeroing, calibration and venting to close the system in a single unit. It is suitable for liquid or vapor service

Five valve manifolds with a 3/16” (4.8 mm) or 3/8” (9.5 mm) orifice for differential pressure natural gas services to 6000 psig (414 barg). M6TW and M6TAW offer a choice of connection options for remotely mounted differential pressure transmitter applications. The M66 offers a larger orifice for positive drainage of wet gas and hydrates and reduced signal variance in pulsating flows.

Differential pressure manifolds with two main block valves and an equalizing valve for direct or remote mounting at pressures to 6000 psig (414 barg). The M4T is used in applications where direct coupling to orifice flanges is not desired.

The AX3A and AX3T are three-valve manifolds that enable instrument operation, isolation and zeroing in a single unit and are suitable for liquid or vapor service.

Versatile two-valve static pressure manifolds with a variety of inlet and outlet connections that enable isolation, calibration and venting within a single unit. General Application - Specifically designed for use with pressure transmitters, gauges and switches in liquid and vapor service, all models are ideal for instrument isolation and provide the ability to vent or calibrate to a separate threaded port.

Differential pressure manifolds with two main block valves and an equalizing valve for direct or remote mounting at pressures to 6000 psig (414 barg)

Differential pressure manifolds with two main block valves and an equalizing valve for direct or remote mounting at pressures to 6000 psig (414 barg)

Differential pressure manifolds with two main block valves and an equalizing valve for direct or remote mounting at pressures to 6000 psig (414 barg)

Block and bleed, two valve manifolds with indirect and direct mount capabilities for static pressures to 6000 psig (414 barg)